Sizes of our CLC Bricks

Brick Size mm	Approx. weight per Brick (kg)	No. of bricks in a Truck (8tons capacity)	No. of Bricks / cub mtre
600x200x200	20 (+ or – 1)	400	41
600x200x150	15 (+ or – 1)	600	55
600x200x100	10 (+ or – 1)	800	83

Process of Manufacture of CLC Bricks

Machines we are using :

1. Mixer (Ribbon Type)
2. Conveyor
3. Water Pump
4. Foam Generator
5. Digital weighing system
6. Compressor
7. Control Panel
8. Trollies to carry slurry
9. Water tank 2000 ltrs capacity
10. Foam Tank 500 ltres capacity
11. Platform Trollies
12. Molds

Materials :

1. Cement
2. Fly Ash
3. Protein Foam (Veg)
4. Water
5. Demoulding oil

Process : 

To manufacture one m3 CLC Bricks, first we fill the water as per requirement with pump from water tank, Later we run the conveyor and conveyor belt drops 500 kgs of Fly ash into the Mixer. Flyash and Mixer will be started simultaneously. We drop the 5 bags i.e., 250 kgs of 53 grade OPC cement in to the Mixer. Later 1.2 kgs of foaming Agent diluted with 30 litres of water will be added and mixed thoroughly. Air bubbles thoroughly mixes in cement and flyash slurry. At this point the one litre slurry taken out from Mixer and weighed for density. If it shows the required density, the slurry will be drained into trollies and these trollies transports slurry to the place where molds kept. This CLC cement slurry poured into molds. The outer frame of the molds removed after 18 to 24 hours and the separation plates removed after 48 afters. Then the finished CLC Bricks removed to curing area and curing will be done for 28 days. From 29th day onwards our CLC Bricks ready for sale. We are using 600mm x 200mm x 100/150/200mm molds.